3D PAWS

http://3d.chordsrt.com/measurements/url_create?key=hidden&lx=46993.8
NWS Testbed - Arduino MKR Full Station (id: 86) (sensor_id: 86) located at Sterling
Description: MKR full station; M5stack cables; Lux sensor; heartbeat monitor
This instrument is designated as: ACTIVE
(If 'INACTIVE', the instrument will not appear in the dashboard.)

Measurements

14599124 measurements were reported.
This instrument is expected to report a measurement every 900 seconds.
The first measurement was measured at 2022-09-16 17:09:20 UTC.
The last measurement is 1 minute old. It was measured at 2024-04-23 16:47:53 UTC.


Plot measurements for the last 1 weeks

Live Update Interval (in seconds)        Live Data Monitor


Data Start Time: Data End Time:




Variables

Short Name Name Units Min/Max (Plot) Measured Property  
bp1 BMP390 Pressure hectopascal
hPa 		/ Air Pressure Value
bt1 BMP390 Temperature degree celsius
degC 		/ Temperature
mt1 MCP9808 Temperature 1 degree celsius
degC 		/ Temperature
ws windspeed meters per second
m/s 		/ Wind Speed
wd winddirection degree
deg 		/ Wind Direction Angle
rg Station Rain Gauge millimeter
mm 		/ Precipitation
wg wind_gust meters per second
m/s 		/ Wind Speed
wgd wind_gust_direction degree
deg 		/ Wind Direction Angle
lx Light sensor lux
lx 		/ Downwelling Irradiance
css Cell_Signal_Strength percent
% 		/ State Of Health
hth Health_16bits count
# 		/ State Of Health
bh1 BMX280 Humidity 1 percent
% 		/ Humidity Value
sh1 SHT21D Humidity percent
% 		/ Humidity Value
st1 SHT21D Temperature degree celsius
degC 		/ Temperature
ht2 HIH Temperature degree celsius
degC 		/ Temperature
hh2 HIH Humidity percent
% 		/ Humidity Value
mt2 MCP9808 Temperature 2 degree celsius
degC 		/ Temperature
ht1 HTU21D Temperature degree celsius
degC 		/ Temperature
hh1 HTU Relative Humidity percent
% 		/ Humidity Value

Back